Does the BioFlux 1000Z interface fit my microscope?

This article details the measurements you need to determine if your microscope can accept the 1000Z interface

Print Friendly and PDF

 

The BioFlux 1000Z interface insert is designed to fit standard K-frame stages from Zeiss, Marzhauser, and others. To determine if your stage can accept one of the BioFlux 1000Z interface configurations, take the following measurements.

The following measurements are required:

  1. Length of insert opening
  2. Width of insert opening
  3. Gap between stage deck and condenser

 

  1. Length of insert opening: 16cm
    Length
  2. Width of insert opening: 11cm
    Width
  3. Minimum clearance distance from deck of stage: 5cm
    Height