Instructions for Installing BioFlux Montage onto Windows 10

  1. Enable the .NET Framework 3.5 in Control Panel. You can enable the .NET Framework 3.5 through the Windows Control Panel. This option requires an Internet connection.

  2. Press the Windows key on your keyboard, type "Windows Features", and press Enter. The Turn Windows features on or off dialog box appears.

  3. Select the .NET Framework 3.5 (includes .NET 2.0 and 3.0) check box, select OK.

  4. Set Windows10 PC to Ignoring Signature Enforcement at start up by pressing and holding the Shift key on your keyboard and clicking the Restart button.

  5. Choose Troubleshoot > Advanced options > Startup Settings and click the Restart button.

  6. When your computer restarts, you'll see a list of options. Press F7 on your keyboard to select Disable driver

    signature enforcement

  7. If needed, install all necessary drivers (drivers for camera, USB, PCLe, etc...)

  8. Install Bioflux Montage as windows7-compatible and as admin (apply for all users) by running the autorun on

    the Bioflux Montage software package and choose x64.

  9. Follow on screen instructions. You may need to remove the old and reinstall the newer version of Sentinel

    Protection Driver. See below link for more information, instructions, and downloads:

  10. Install the Bioflux200 software as windows7-compatible and as admin (apply for all users).

    1. Install Bioflux200 Full Install V2.5.0.8

    2. After installing Bioflux200 V2.5.0.8, install the Bioflux200 V2.6.0.9 patch

  11. Install MTB2011 software. Restart the PC.